Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

netron external network from flat to vlan

Hi Guys,

We had setup Kilo openstack with detault neutron network guided by official document But now we found that the flat ext network is not enough for us because we have many different external network need to be attached to openstack

Now our /etc/neutron/plugin.ini configuration as below [ml2] type_drivers = flat,vlan,gre,vxlan

[ovs] bridge_mappings = external:br-ex

May I know what I have to do except add below to /etc/neutron/plugin.ini and change the port mode which was bridged in br-ex to trunk: [ml2_type_vlan] network_vlan_ranges=external:2:500

Do I have to delete all current external network data:ip,router,ports etc? Is there anyway to keep current floating ip mapping?

Thx B&R Allen,

netron external network from flat to vlan

Hi Guys,

We had setup Kilo openstack with detault neutron network guided by official document But now we found that the flat ext network is not enough for us because we have many different external network need to be attached to openstack

Now our /etc/neutron/plugin.ini configuration as below [ml2] type_drivers = flat,vlan,gre,vxlan

[ovs] bridge_mappings = external:br-ex

May I know what I have to do except add below to /etc/neutron/plugin.ini and change the port mode which was bridged in br-ex to trunk: [ml2_type_vlan] network_vlan_ranges=external:2:500

Do I have to delete all current external network data:ip,router,ports etc? Is there anyway to keep current floating ip mapping?

Thx B&R Allen,

netron neutron external network from flat to vlan

Hi Guys,

We had setup Kilo openstack with detault neutron network guided by official document But now we found that the flat ext network is not enough for us because we have many different external network need to be attached to openstack

Now our /etc/neutron/plugin.ini configuration as below [ml2] type_drivers = flat,vlan,gre,vxlan

[ovs] bridge_mappings = external:br-ex

May I know what I have to do except add below to /etc/neutron/plugin.ini and change the port mode which was bridged in br-ex to trunk: [ml2_type_vlan] network_vlan_ranges=external:2:500

Do I have to delete all current external network data:ip,router,ports etc? Is there anyway to keep current floating ip mapping?mapping or is there any other better way to attached many different external networks to openstack?

Thx B&R Allen,