Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

HP Heion Baremetal Installation - overcloud is not pxe booting.

Going through the installation guide, having difficulty getting overcloud to pxe boot.

Is there anything specific that needs to be done network wise in order to get this to work?

The undercloud was successfully installed. These are the env variables I used.

export BRIDGE_INTERFACE=em1
export BM_NETWORK_SEED_IP=10.250.0.1
export BM_NETWORK_CIDR=10.250.0.0/24
export BM_NETWORK_GATEWAY=10.250.0.250

export OVERCLOUD_NTP_SERVER=192.168.0.2
export UNDERCLOUD_NTP_SERVER=192.168.0.2

export OVERCLOUD_NeutronPublicInterface=eth0 
export UNDERCLOUD_NeutronPublicInterface=eth0

export FLOATING_START=10.250.0.100
export FLOATING_END=10.250.0.115 
export FLOATING_CIDR=10.250.0.0/24

export OVERCLOUD_NeutronPublicInterface=vlan3050
export NeutronPublicInterfaceIP=10.250.10.1/24
export NeutronPublicInterfaceRawDevice=eth0
export NeutronPublicInterfaceDefaultRoute=10.250.10.254 
export FLOATING_START=10.250.10.10 
export FLOATING_END=10.250.10.25
export FLOATING_CIDR=10.250.10.0/24


export BM_NETWORK_SEED_RANGE_START=10.250.0.201 
export BM_NETWORK_SEED_RANGE_END=10.250.0.225

export BM_NETWORK_UNDERCLOUD_RANGE_START=10.250.0.151
export BM_NETWORK_UNDERCLOUD_RANGE_END=10.250.0.175

export BM_NETWORK_GATEWAY=10.250.0.250

Thanks in advance.

HP Heion Helion Baremetal Installation - overcloud is not pxe booting.

Going through the installation guide, having difficulty getting overcloud to pxe boot.

Is there anything specific that needs to be done network wise in order to get this to work?

The undercloud was successfully installed. These are the env variables I used.

export BRIDGE_INTERFACE=em1
export BM_NETWORK_SEED_IP=10.250.0.1
export BM_NETWORK_CIDR=10.250.0.0/24
export BM_NETWORK_GATEWAY=10.250.0.250

export OVERCLOUD_NTP_SERVER=192.168.0.2
export UNDERCLOUD_NTP_SERVER=192.168.0.2

export OVERCLOUD_NeutronPublicInterface=eth0 
export UNDERCLOUD_NeutronPublicInterface=eth0

export FLOATING_START=10.250.0.100
export FLOATING_END=10.250.0.115 
export FLOATING_CIDR=10.250.0.0/24

export OVERCLOUD_NeutronPublicInterface=vlan3050
export NeutronPublicInterfaceIP=10.250.10.1/24
export NeutronPublicInterfaceRawDevice=eth0
export NeutronPublicInterfaceDefaultRoute=10.250.10.254 
export FLOATING_START=10.250.10.10 
export FLOATING_END=10.250.10.25
export FLOATING_CIDR=10.250.10.0/24


export BM_NETWORK_SEED_RANGE_START=10.250.0.201 
export BM_NETWORK_SEED_RANGE_END=10.250.0.225

export BM_NETWORK_UNDERCLOUD_RANGE_START=10.250.0.151
export BM_NETWORK_UNDERCLOUD_RANGE_END=10.250.0.175

export BM_NETWORK_GATEWAY=10.250.0.250

Thanks in advance.

HP Helion Baremetal Installation - overcloud is not pxe booting.

Going through the installation guide, having difficulty getting overcloud to pxe boot.

Is there anything specific that needs to be done network wise in order to get this to work?

The undercloud was successfully installed. These are the env variables I used.

export BRIDGE_INTERFACE=em1
export BM_NETWORK_SEED_IP=10.250.0.1
export BM_NETWORK_CIDR=10.250.0.0/24
export BM_NETWORK_GATEWAY=10.250.0.250

export OVERCLOUD_NTP_SERVER=192.168.0.2
export UNDERCLOUD_NTP_SERVER=192.168.0.2

export OVERCLOUD_NeutronPublicInterface=eth0 
export UNDERCLOUD_NeutronPublicInterface=eth0

export FLOATING_START=10.250.0.100
export FLOATING_END=10.250.0.115 
export FLOATING_CIDR=10.250.0.0/24

export OVERCLOUD_NeutronPublicInterface=vlan3050
export NeutronPublicInterfaceIP=10.250.10.1/24
export NeutronPublicInterfaceRawDevice=eth0
export NeutronPublicInterfaceDefaultRoute=10.250.10.254 
export FLOATING_START=10.250.10.10 
export FLOATING_END=10.250.10.25
export FLOATING_CIDR=10.250.10.0/24


export BM_NETWORK_SEED_RANGE_START=10.250.0.201 
export BM_NETWORK_SEED_RANGE_END=10.250.0.225

export BM_NETWORK_UNDERCLOUD_RANGE_START=10.250.0.151
export BM_NETWORK_UNDERCLOUD_RANGE_END=10.250.0.175

export BM_NETWORK_GATEWAY=10.250.0.250

Thanks in advance.