hi, i install openstack havana via packstack. It shows installation was successfully completed; but when I run the openstack-status commanad it shows nova components are dead.
root@geforce ~(keystone_admin)]# openstack-status
== Nova services ==
openstack-nova-api: dead
openstack-nova-cert: dead
openstack-nova-compute: dead
openstack-nova-network: dead
openstack-nova-scheduler: dead
openstack-nova-conductor: dead
== Glance services ==
openstack-glance-api: active
openstack-glance-registry: active
== Keystone service ==
openstack-keystone: active
== Horizon service ==
openstack-dashboard: active
== neutron services ==
neutron-server: active
neutron-dhcp-agent: active
neutron-l3-agent: active
neutron-metadata-agent: active
neutron-lbaas-agent: active
neutron-openvswitch-agent: active
== Swift services ==
openstack-swift-proxy: active
openstack-swift-account: active
openstack-swift-container: active
openstack-swift-object: active
== Cinder services ==
openstack-cinder-api: active
openstack-cinder-scheduler: active
openstack-cinder-volume: active
== Ceilometer services ==
openstack-ceilometer-api: active
openstack-ceilometer-central: active
openstack-ceilometer-compute: active
openstack-ceilometer-collector: active
openstack-ceilometer-alarm-notifier: active
openstack-ceilometer-alarm-evaluator: active
== Heat services ==
openstack-heat-api: active
openstack-heat-api-cfn: active
openstack-heat-api-cloudwatch: active
openstack-heat-engine: active
== Support services ==
mysqld: active
libvirtd: active
openvswitch: active
messagebus: active
tgtd: active
qpidd: active
memcached: active
And, I am also atteching my packstack answer file :
[general]
Path to a Public key to install on servers. If a usable key has not
been installed on the remote servers the user will be prompted for a
password and this key will be installed so the password will not be
required again
CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub
Set to 'y' if you would like Packstack to install MySQL
CONFIG_MYSQL_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack Image
Service (Glance)
CONFIG_GLANCE_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack Block
Storage (Cinder)
CONFIG_CINDER_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack Compute
(Nova)
CONFIG_NOVA_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack
Networking (Neutron)
CONFIG_NEUTRON_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack
Dashboard (Horizon)
CONFIG_HORIZON_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack Object
Storage (Swift)
CONFIG_SWIFT_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack
Metering (Ceilometer)
CONFIG_CEILOMETER_INSTALL=y
Set to 'y' if you would like Packstack to install OpenStack
Orchestration (Heat)
CONFIG_HEAT_INSTALL=y
Set to 'y' if you would like Packstack to install the OpenStack
Client packages. An admin "rc" file will also be installed
CONFIG_CLIENT_INSTALL=y
Comma separated list of NTP servers. Leave plain if Packstack
should not install ntpd on instances.
CONFIG_NTP_SERVERS=
Set to 'y' if you would like Packstack to install Nagios to monitor
OpenStack hosts
CONFIG_NAGIOS_INSTALL=y
Comma separated list of servers to be excluded from installation in
case you are running Packstack the second time with the same answer
file and don't want Packstack to touch these servers. Leave plain if
you don't need to exclude any server.
EXCLUDE_SERVERS=
The IP address of the server on which to install MySQL
CONFIG_MYSQL_HOST=172.17.15.23
Username for the MySQL admin user
CONFIG_MYSQL_USER=root
Password for the MySQL admin user
CONFIG_MYSQL_PW=xxxxxxxxxxxxx
The IP address of the server on which to install the QPID service
CONFIG_QPID_HOST=172.17.15.23
Enable SSL for the QPID service
CONFIG_QPID_ENABLE_SSL=y
Enable Authentication for the QPID service
CONFIG_QPID_ENABLE_AUTH=n
The password for the NSS certificate database of the QPID service
CONFIG_QPID_NSS_CERTDB_PW=xxxxxxxxxxxxxxxxxxxxxxx
The port in which the QPID service listens to SSL connections
CONFIG_QPID_SSL_PORT=5671
The filename of the certificate that the QPID service is going to
use
CONFIG_QPID_SSL_CERT_FILE=/etc/pki/tls/certs/qpid_selfcert.pem
The filename of the private key that the QPID service is going to
use
CONFIG_QPID_SSL_KEY_FILE=/etc/pki/tls/private/qpid_selfkey.pem
Auto Generates self signed SSL certificate and key
CONFIG_QPID_SSL_SELF_SIGNED=y
User for qpid authentication
CONFIG_QPID_AUTH_USER=qpid_user
Password for user authentication
CONFIG_QPID_AUTH_PASSWORD=xxxxxxxxxxxxxxxxx
The IP address of the server on which to install Keystone
CONFIG_KEYSTONE_HOST=172.17.15.23
The password to use for the Keystone to access DB
CONFIG_KEYSTONE_DB_PW=xxxxxxxxxxxxxxxx
The token to use for the Keystone service api
CONFIG_KEYSTONE_ADMIN_TOKEN=729230e638b744e2a5ae66f090e1da6a
The password to use for the Keystone admin user
CONFIG_KEYSTONE_ADMIN_PW=xxxxxxxxxxxxxxxx
The password to use for the Keystone demo user
CONFIG_KEYSTONE_DEMO_PW=xxxxxxxxxxxxxxxxx
Kestone token format. Use either UUID or PKI
CONFIG_KEYSTONE_TOKEN_FORMAT=PKI
The IP address of the server on which to install Glance
CONFIG_GLANCE_HOST=172.17.15.23
The password to use for the Glance to access DB
CONFIG_GLANCE_DB_PW=xxxxxxxxxxxxxxxxxxxx
The password to use for the Glance to authenticate with Keystone
CONFIG_GLANCE_KS_PW=xxxxxxxxxxxxxxxxx
The IP address of the server on which to install Cinder
CONFIG_CINDER_HOST=172.17.15.23
The password to use for the Cinder to access DB
CONFIG_CINDER_DB_PW=xxxxxxxxxxxxxxxxxxx
The password to use for the Cinder to authenticate with Keystone
CONFIG_CINDER_KS_PW=xxxxxxxxxxxxxxxxxxx
The Cinder backend to use, valid options are: lvm, gluster, nfs
CONFIG_CINDER_BACKEND=lvm
Create Cinder's volumes group. This should only be done for testing
on a proof-of-concept installation of Cinder. This will create a
file-backed volume group and is not suitable for production usage.
CONFIG_CINDER_VOLUMES_CREATE=y
Cinder's volumes group size. Note that actual volume size will be
extended with 3% more space for VG metadata.
CONFIG_CINDER_VOLUMES_SIZE=20G
A single or comma separated list of gluster volume shares to mount,
eg: ip-address:/vol-name, domain:/vol-name
CONFIG_CINDER_GLUSTER_MOUNTS=
A single or comma seprated list of NFS exports to mount, eg: ip-
address:/export-name
CONFIG_CINDER_NFS_MOUNTS=
The IP address of the server on which to install the Nova API
service
CONFIG_NOVA_API_HOST=172.17.15.23
The IP address of the server on which to install the Nova Cert
service
CONFIG_NOVA_CERT_HOST=172.17.15.23
The IP address of the server on which to install the Nova VNC proxy
CONFIG_NOVA_VNCPROXY_HOST=172.17.15.23
A comma separated list of IP addresses on which to install the Nova
Compute services
CONFIG_NOVA_COMPUTE_HOSTS=172.17.15.26
The IP address of the server on which to install the Nova Conductor
service
CONFIG_NOVA_CONDUCTOR_HOST=172.17.15.23
The password to use for the Nova to access DB
CONFIG_NOVA_DB_PW=xxxxxxxxxxxxxxxxx
The password to use for the Nova to authenticate with Keystone
CONFIG_NOVA_KS_PW=xxxxxxxxxxxxxxx
The IP address of the server on which to install the Nova Scheduler
service
CONFIG_NOVA_SCHED_HOST=172.17.15.23
The overcommitment ratio for virtual to physical CPUs. Set to 1.0
to disable CPU overcommitment
CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
The overcommitment ratio for virtual to physical RAM. Set to 1.0 to
disable RAM overcommitment
CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
Private interface for Flat DHCP on the Nova compute servers
CONFIG_NOVA_COMPUTE_PRIVIF=eth1
The list of IP addresses of the server on which to install the Nova
Network service
CONFIG_NOVA_NETWORK_HOSTS=172.17.15.23
Nova network manager
CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
Public interface on the Nova network server
CONFIG_NOVA_NETWORK_PUBIF=eth0
Private interface for network manager on the Nova network server
CONFIG_NOVA_NETWORK_PRIVIF=eth1
IP Range for network manager
CONFIG_NOVA_NETWORK_FIXEDRANGE=172.17.15.27/24
IP Range for Floating IP's
CONFIG_NOVA_NETWORK_FLOATRANGE=172.17.15.180/24
Name of the default floating pool to which the specified floating
ranges are added to
CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
Automatically assign a floating IP to new instances
CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
First VLAN for private networks
CONFIG_NOVA_NETWORK_VLAN_START=100
Number of networks to support
CONFIG_NOVA_NETWORK_NUMBER=1
Number of addresses in each private subnet
CONFIG_NOVA_NETWORK_SIZE=255
The IP addresses of the server on which to install the Neutron
server
CONFIG_NEUTRON_SERVER_HOST=172.17.15.23
The password to use for Neutron to authenticate with Keystone
CONFIG_NEUTRON_KS_PW=xxxxxxxxxxxxxx
The password to use for Neutron to access DB
CONFIG_NEUTRON_DB_PW=xxxxxxxxxxxxx
A comma separated list of IP addresses on which to install Neutron
L3 agent
CONFIG_NEUTRON_L3_HOSTS=172.17.15.23
The name of the bridge that the Neutron L3 agent will use for
external traffic, or 'provider' if using provider networks
CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex
A comma separated list of IP addresses on which to install Neutron
DHCP agent
CONFIG_NEUTRON_DHCP_HOSTS=172.17.15.23
A comma separated list of IP addresses on which to install Neutron
LBaaS agent
CONFIG_NEUTRON_LBAAS_HOSTS=172.17.15.23,172.17.15.26
The name of the L2 plugin to be used with Neutron
CONFIG_NEUTRON_L2_PLUGIN=openvswitch
A comma separated list of IP addresses on which to install Neutron
metadata agent
CONFIG_NEUTRON_METADATA_HOSTS=172.17.15.23
A comma separated list of IP addresses on which to install Neutron
metadata agent
CONFIG_NEUTRON_METADATA_PW=xxxxxxxxxxxxxxxxx
The type of network to allocate for tenant networks (eg. vlan,
local, gre)
CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
A comma separated list of VLAN ranges for the Neutron linuxbridge
plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
CONFIG_NEUTRON_LB_VLAN_RANGES=
A comma separated list of interface mappings for the Neutron
linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
:br-eth3)
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
Type of network to allocate for tenant networks (eg. vlan, local,
gre)
CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vlan
A comma separated list of VLAN ranges for the Neutron openvswitch
plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet1:10:20
A comma separated list of bridge mappings for the Neutron
openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
:br-eth3)
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-eth1
A comma separated list of colon-separated OVS bridge:interface
pairs. The interface will be added to the associated bridge.
CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-eth1:eth1
A comma separated list of tunnel ranges for the Neutron openvswitch
plugin (eg. 1:1000)
CONFIG_NEUTRON_OVS_TUNNEL_RANGES=
The interface for the OVS tunnel. Packstack will override the IP
address used for GRE tunnels on this hypervisor to the IP found on
the specified interface. (eg. eth1)
CONFIG_NEUTRON_OVS_TUNNEL_IF=
The IP address of the server on which to install the OpenStack
client packages. An admin "rc" file will also be installed
CONFIG_OSCLIENT_HOST=172.17.15.23
The IP address of the server on which to install Horizon
CONFIG_HORIZON_HOST=172.17.15.23
To set up Horizon communication over https set this to "y"
CONFIG_HORIZON_SSL=y
PEM encoded certificate to be used for ssl on the https server,
leave blank if one should be generated, this certificate should not
require a passphrase
CONFIG_SSL_CERT=
Keyfile corresponding to the certificate if one was entered
CONFIG_SSL_KEY=
The IP address on which to install the Swift proxy service
(currently only single proxy is supported)
CONFIG_SWIFT_PROXY_HOSTS=172.17.15.23
The password to use for the Swift to authenticate with Keystone
CONFIG_SWIFT_KS_PW=xxxxxxxxxxxxxxxx
A comma separated list of IP addresses on which to install the
Swift Storage services, each entry should take the format
<ipaddress>[/dev], for example 127.0.0.1/vdb will install /dev/vdb
on 127.0.0.1 as a swift storage device(packstack does not create the
filesystem, you must do this first), if /dev is omitted Packstack
will create a loopback device for a test setup
CONFIG_SWIFT_STORAGE_HOSTS=172.17.15.23
Number of swift storage zones, this number MUST be no bigger than
the number of storage devices configured
CONFIG_SWIFT_STORAGE_ZONES=1
Number of swift storage replicas, this number MUST be no bigger
than the number of storage zones configured
CONFIG_SWIFT_STORAGE_REPLICAS=1
FileSystem type for storage nodes
CONFIG_SWIFT_STORAGE_FSTYPE=ext4
Shared secret for Swift
CONFIG_SWIFT_HASH=3d273f79089445cd
Size of the swift loopback file storage device
CONFIG_SWIFT_STORAGE_SIZE=2G
Whether to provision for demo usage and testing
CONFIG_PROVISION_DEMO=y
The CIDR network address for the floating IP subnet
CONFIG_PROVISION_DEMO_FLOATRANGE=172.17.15.27/28
Whether to configure tempest for testing
CONFIG_PROVISION_TEMPEST=n
The uri of the tempest git repository to use
CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
The revision of the tempest git repository to use
CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
Whether to configure the ovs external bridge in an all-in-one
deployment
CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=y
The IP address of the server on which to install Heat service
CONFIG_HEAT_HOST=172.17.15.23
The password used by Heat user to authenticate against MySQL
CONFIG_HEAT_DB_PW=xxxxxxxxxxxxxxx
The password to use for the Heat to authenticate with Keystone
CONFIG_HEAT_KS_PW=xxxxxxxxxxxxxx
Set to 'y' if you would like Packstack to install Heat CloudWatch
API
CONFIG_HEAT_CLOUDWATCH_INSTALL=y
Set to 'y' if you would like Packstack to install Heat
CloudFormation API
CONFIG_HEAT_CFN_INSTALL=y
The IP address of the server on which to install Heat CloudWatch
API service
CONFIG_HEAT_CLOUDWATCH_HOST=172.17.15.23
The IP address of the server on which to install Heat
CloudFormation API service
CONFIG_HEAT_CFN_HOST=172.17.15.23
The IP address of the server on which to install Ceilometer
CONFIG_CEILOMETER_HOST=172.17.15.23
Secret key for signing metering messages.
CONFIG_CEILOMETER_SECRET=cbdf1e9699ac47d8
The password to use for Ceilometer to authenticate with Keystone
CONFIG_CEILOMETER_KS_PW=xxxxxxxxxxxxx
The IP address of the server on which to install the Nagios server
CONFIG_NAGIOS_HOST=172.17.15.23
The password of the nagiosadmin user on the Nagios server
CONFIG_NAGIOS_PW=xxxxxxxxxxxxx
To subscribe each server to EPEL enter "y"
CONFIG_USE_EPEL=y
A comma separated list of URLs to any additional yum repositories
to install
CONFIG_REPO=
To subscribe each server with Red Hat subscription manager, include
this with CONFIG_RH_PW
CONFIG_RH_USER=
To subscribe each server with Red Hat subscription manager, include
this with CONFIG_RH_USER
CONFIG_RH_PW=
To subscribe each server to Red Hat Enterprise Linux 6 Server Beta
channel (only needed for Preview versions of RHOS) enter "y"
CONFIG_RH_BETA_REPO=n
To subscribe each server with RHN Satellite,fill Satellite's URL
here. Note that either satellite's username/password or activation
key has to be provided
CONFIG_SATELLITE_URL=
Username to access RHN Satellite
CONFIG_SATELLITE_USER=
Password to access RHN Satellite
CONFIG_SATELLITE_PW=
Activation key for subscription to RHN Satellite
CONFIG_SATELLITE_AKEY=
Specify a path or URL to a SSL CA certificate to use
CONFIG_SATELLITE_CACERT=
If required specify the profile name that should be used as an
identifier for the system in RHN Satellite
CONFIG_SATELLITE_PROFILE=
Comma separated list of flags passed to rhnreg_ks. Valid flags are:
novirtinfo, norhnsd, nopackages
CONFIG_SATELLITE_FLAGS=novirtinfo
Specify a HTTP proxy to use with RHN Satellite
CONFIG_SATELLITE_PROXY=
Specify a username to use with an authenticated HTTP proxy
CONFIG_SATELLITE_PROXY_USER=
Specify a password to use with an authenticated HTTP proxy.
CONFIG_SATELLITE_PROXY_PW=
