Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

Openvswitch connects directly to tap

Hi,

Please help me figure this out, I am really lost with the configuration of the OVS. As you may see in the output below of the ovs-vsctl show command there is no bridge in the OVS and when i start the instance it connects it directl to the br-int. Manager "ptcp:6640:127.0.0.1" is_connected: true
Bridge br-int Controller "tcp:127.0.0.1:6633" is_connected: true fail_mode: secure Port "int-br-eth1" Interface "int-br-eth1" type: patch options: {peer="phy-br-eth1"}
Port br-int Interface br-int type: internal Bridge "br-eth1" Controller "tcp:127.0.0.1:6633" is_connected: true fail_mode: secure Port "br-eth1" Interface "br-eth1" type: internal Port "eth1" Interface "eth1" Port "phy-br-eth1" Interface "phy-br-eth1" type: patch options: {peer="int-br-eth1"}

in the moment that i start the instance i will have a tap created but it will attach to the br-int and if i run the command brctl show there is no bridge at all. the configuration file of openvswitch_agent.ini is pasted below: [ovs]

bridge_mappings =provider:br-eth1

[securitygroup]

firewall_driver = openvswitch

enable_security_group = false

enable_ipset = false

Thank you

Openvswitch connects directly to tap

Hi,

Please help me figure this out, I am really lost with the configuration of the OVS. As you may see in the output below of the ovs-vsctl show command there is no bridge in the OVS and when i start the instance it connects it directl to the br-int. br-int.

Manager "ptcp:6640:127.0.0.1"
     is_connected: true 
Bridge br-int Controller "tcp:127.0.0.1:6633" is_connected: true fail_mode: secure Port "int-br-eth1" Interface "int-br-eth1" type: patch options: {peer="phy-br-eth1"}
Port br-int Interface br-int type: internal Bridge "br-eth1" Controller "tcp:127.0.0.1:6633" is_connected: true fail_mode: secure Port "br-eth1" Interface "br-eth1" type: internal Port "eth1" Interface "eth1" Port "phy-br-eth1" Interface "phy-br-eth1" type: patch options: {peer="int-br-eth1"}

{peer="int-br-eth1"}

in the moment that i start the instance i will have a tap created but it will attach to the br-int and if i run the command brctl show there is no bridge at all. the configuration file of openvswitch_agent.ini is pasted below: [ovs]below:

[ovs]

bridge_mappings =provider:br-eth1

[securitygroup]

=provider:br-eth1 [securitygroup] firewall_driver = openvswitch

openvswitch enable_security_group = false

false enable_ipset = false

false

Thank you you