Ask Your Question
0

ifcfg-eth configuration when using RDO packstack [closed]

asked 2014-06-01 11:00:29 -0500

kobo gravatar image

what is the eth configuration when deploying multinode RDO throw packstack.
this is what i did:

network node
eth0 managemet
DEVICE=eth0
HWADDR=00:C0:9F:45:80:80
TYPE=Ethernet
UUID=cc817561-3b07-46b9-97d0-a838113a691d
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=192.168.9.55
NETMASK=255.255.255.0

eth1 data
DEVICE=eth1
TYPE=Ethernet
HWADDR=00:0E:0C:32:88:88
ONBOOT=yes

eth2 external
DEVICE=eth2
IPADDR=172.20.1.1
NETMASK=255.255.255.0
GATEWAY=172.20.1.253
DNS1=192.168.9.254
ONBOOT=yes

compute node:
DEVICE=eth0
HWADDR=00:30:48:7E:24:70
TYPE=Ethernet
UUID=56962faf-ab0a-4af4-9183-91f74950e2ac
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=192.168.9.88
NETMASK=255.255.255.0
GATEWAY=192.168.9.254
DNS1=192.168.9.254

controlle node:
DEVICE=eth0
HWADDR=00:16:36:D2:F1:88
TYPE=Ethernet
UUID=998f2cdd-a119-4bf7-88f8-03ba51cbe5e8
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=192.168.9.99
NETMASK=255.255.255.0
GATEWAY=192.168.9.254
DNS1=192.168.9.254
DOMAIN=

is this correct?

edit retag flag offensive reopen merge delete

Closed for the following reason the question is answered, right answer was accepted by koolhead17
close date 2014-06-17 07:35:53.379244

Comments

What kind of Multnode Setup ?
1. Neutron OVS&VLAN
2. Neutron OVS&GRE
3. Neutron ML2&OVS&GRE
. . . . . . .

dbaxps gravatar imagedbaxps ( 2014-06-01 11:17:14 -0500 )edit

Neutron OVS&VLAN

kobo gravatar imagekobo ( 2014-06-01 14:05:04 -0500 )edit

2 answers

Sort by ยป oldest newest most voted
0

answered 2014-06-12 04:26:44 -0500

kobo gravatar image

updated 2014-06-12 06:09:00 -0500

I succesfully installed icehouse using eth0 as management
eth1 as data with trunk ports
and eth2 as external. also this is working with gre installation

edit flag offensive delete link more

Comments

Did you change your network config ?

dbaxps gravatar imagedbaxps ( 2014-06-12 04:33:49 -0500 )edit

yes from vlan to gre

kobo gravatar imagekobo ( 2014-06-12 06:07:43 -0500 )edit
1

answered 2014-06-01 12:45:59 -0500

dbaxps gravatar image
For Neutron OVS&VLAN setup view for your mistakes here

http://www.andrewklau.com/getting-sta...

For Neutron OVS&GRE  setup view for your mistakes here

http://openstack.redhat.com/forum/dis...
and here
http://openstack.redhat.com/GettingSt...

edit flag offensive delete link more

Comments

Thank you for your answer, I saw the link for vlan but it does not have network configuration
my simple question is how to configure the eth interfaces on the nodes

kobo gravatar imagekobo ( 2014-06-02 07:48:55 -0500 )edit

@kobo,

it does have network configuration for Neutron OVS&VLAN for (Controller+Neutron Server)&&Compute. eth1 should be placed in promiscuous mode and NM_CONTROLLED=no.
eth0 - (management network as usual but agaun NM_CONTROLLED=no) , eth2 OVS port of br-ex.
service NetworkManager disable ;
service network enable ;
reboot
dbaxps gravatar imagedbaxps ( 2014-06-02 08:22:13 -0500 )edit

Get to know Ask OpenStack

Resources for moderators

Question Tools

1 follower

Stats

Asked: 2014-06-01 11:00:29 -0500

Seen: 339 times

Last updated: Jun 12 '14