Error verify operation with networking option 1

asked 2018-11-16 04:46:22 -0600

najeh gravatar image

After the installation and configuration of networking servive with option 1, i would like to ist agents to verify successful launch of the neutron agents using this command openstack network agent list

The output indicate two agents on the controller node and one agent on each compute node. Linux bridge agent not indicated for the controller node.

The installation guide indicate that i should obtain three agents for the controller ? How can i resolve the problem ?

edit retag flag offensive close merge delete



Are you doing a manual install? If so. you need to install and enable the rest of the services you want to use, like openvswitch or linuxbridge.

reynoni gravatar imagereynoni ( 2018-11-16 07:51:20 -0600 )edit

@reyoni how can i do this ?

najeh gravatar imagenajeh ( 2018-11-16 07:55:42 -0600 )edit

2 answers

Sort by ยป oldest newest most voted

answered 2018-11-16 08:18:45 -0600

reynoni gravatar image

I'm making a lot of assumptions since there isn't too much information. I'm assuming you are using ubuntu 18.04, and openstack rocky, following this installation guide for neutron provider 1 network on a controller node:

The first thing it tells you to do is apt install a bunch of packages, make sure all these packages are installed, if so, you probably need to configure one of the several config files like novainfinite posted above.

The guide posted above will walk you through each individual configuration you need to do. If you have any specific questions or can provide more information on which service isn't registering and whether or not it is properly installed, I can try to help guide you through any further steps.

edit flag offensive delete link more


yes i'am using a ubuntu desktop 18.04 with an openstack rocky. i did all of the listed configuration but i still have the same problem

najeh gravatar imagenajeh ( 2018-11-16 13:33:48 -0600 )edit

Can you run a systemctl status {service-name} for whichever ones are supposed to be running on that machine, but isn't? For example, systemctl status linuxbridge-agent and see if there is an error there?

reynoni gravatar imagereynoni ( 2018-11-19 06:43:53 -0600 )edit

answered 2018-11-16 07:58:52 -0600

yasin lachiny gravatar image

updated 2018-11-16 08:05:44 -0600

in /etc/neutron/plugins/ml2/linuxbridge_agent.ini you should enter the name of provider interface do you enter it write?

edit flag offensive delete link more


yes i do but the problem is the same

najeh gravatar imagenajeh ( 2018-11-16 12:44:19 -0600 )edit

Get to know Ask OpenStack

Resources for moderators

Question Tools



Asked: 2018-11-16 04:46:22 -0600

Seen: 140 times

Last updated: Nov 16 '18