Ask Your Question

Revision history [back]

Using field as comment
Per your report on Network Node

[root@network ~]# ovs-vsctl show
230a8056-b180-48be-b6ab-7da5152b9208
    Manager "ptcp:6640:127.0.0.1"
        is_connected: true
    Bridge br-ex
        Port br-ex
            Interface br-ex
                type: internal
        Port "qg-3009da08-8a"
            Interface "qg-3009da08-8a"
                type: internal
    Bridge br-int
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port br-int
            Interface br-int

You cannot get out without having eth0(X) as port of br-ex

Check this segment in ans.cfg

CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vxlan
CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vxlan
CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
CONFIG_NEUTRON_ML2_VLAN_RANGES=
CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=1001:2000
CONFIG_NEUTRON_ML2_VXLAN_GROUP=239.1.1.2
CONFIG_NEUTRON_ML2_VNI_RANGES=1001:2000
CONFIG_NEUTRON_L2_AGENT=openvswitch
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-ex
CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
CONFIG_NEUTRON_OVS_TUNNEL_IF=eth1
CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789

You skipped CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS to be assigned correct value

Using field as comment
Per your report on Network Node

[root@network ~]# ovs-vsctl show
230a8056-b180-48be-b6ab-7da5152b9208
    Manager "ptcp:6640:127.0.0.1"
        is_connected: true
    Bridge br-ex
        Port br-ex
            Interface br-ex
                type: internal
        Port "qg-3009da08-8a"
            Interface "qg-3009da08-8a"
                type: internal
    Bridge br-int
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port br-int
            Interface br-int

You cannot get out without having eth0(X) as port of br-ex

Check this segment in ans.cfg

CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vxlan
CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vxlan
CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
CONFIG_NEUTRON_ML2_VLAN_RANGES=
CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=1001:2000
CONFIG_NEUTRON_ML2_VXLAN_GROUP=239.1.1.2
CONFIG_NEUTRON_ML2_VNI_RANGES=1001:2000
CONFIG_NEUTRON_L2_AGENT=openvswitch
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-ex
CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
CONFIG_NEUTRON_OVS_TUNNEL_IF=eth1
CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789

You skipped CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS to be assigned correct value

value You can update answer file from http://dbaxps.blogspot.com/2015/10/rdo-liberty-set-up-for-three-nodes.html
as you need regarding adding storage node and updating eth(X) matching your names.