Ask Your Question

Revision history [back]

Follow http://blog.oddbit.com/2014/05/28/multiple-external-networks-wit/ on Network Node.
The key commands per link above

neutron net-create external1 -- --router:external=true \
  --provider:network_type=flat \
  --provider:physical_network=physnet1 
neutron subnet-create --disable-dhcp external1 10.1.0.0/24
neutron net-create external2 -- --router:external=true \
  --provider:network_type=flat \
  --provider:physical_network=physnet2
neutron subnet-create --disable-dhcp external2 10.2.0.0/24

Keep following Larsks

This assumes that eth1 is connected to a network using 10.1.0.0/24 and eth2 is connected to a network using 10.2.0.0/24, and that each network has a gateway sitting at the corresponding

As tenant demo create router1,router2, demo_net1,demo_net2
For router(X) create gateway to external(X) and interface to demo_net(X)

You are supposed to see qg-xxxxxxxx interfaces for both qrouter-namespaces attached to br-int

Follow http://blog.oddbit.com/2014/05/28/multiple-external-networks-wit/ on Network Node.
The key commands per link above

neutron net-create external1 -- --router:external=true \
  --provider:network_type=flat \
  --provider:physical_network=physnet1 
neutron subnet-create --disable-dhcp external1 10.1.0.0/24
neutron net-create external2 -- --router:external=true \
  --provider:network_type=flat \
  --provider:physical_network=physnet2
neutron subnet-create --disable-dhcp external2 10.2.0.0/24

Keep following Larsks

This assumes that eth1 is connected to a network using 10.1.0.0/24 and eth2 is connected to a network using 10.2.0.0/24, and that each network has a gateway sitting at the corresponding
corresponding .1 address.

As tenant demo create router1,router2, demo_net1,demo_net2
For router(X) create gateway to external(X) and interface to demo_net(X)

You are supposed to see qg-xxxxxxxx interfaces for both qrouter-namespaces attached to br-int