Revision history [back]

click to hide/show revision 1
initial version

Thank you for Answer my question.

I tried and success to create volume with image. But I success with cinder-volume service on Management Host not VM.

I think that deploy cinder-volume on Management Host is not efficient because Hostmachine has too much specs. So, I want to deploy cinder-volume service on VM.

Could you please let me know on following questions -

1) I tried your suggestion about deploying on VM with http://wiki.libvirt.org/page/NPIV_in_libvirt (NPIV in libvirt).

but, there are some problem.
first, there is nothing after execute the command "virsh nodedev-list --cap vports".
Is there anything missing?

my test environment is below :

OS : ubuntu 14.04
Storage : EMC VNX5400
# systool -c fc_host -v

Class = "fc_host"

Class Device = "host1" Class Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.0/host1/fc_host/host1" dev_loss_tmo = "45" fabric_name = "0xffffffffffffffff" issue_lip = <store method="" only=""> max_npiv_vports = "254" node_name = "0x20000024ff411282" npiv_vports_inuse = "0" port_id = "0x0000e8" port_name = "0x21000024ff411282" port_state = "Online" port_type = "LPort (private loop)" speed = "8 Gbit" supported_classes = "Class 3" supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit" symbolic_name = "QLE2562 FW:v7.01.00 DVR:v8.06.00.08-k" system_hostname = "" tgtid_bind_type = "wwpn (World Wide Port Name)" uevent = vport_create = <store method="" only=""> vport_delete = <store method="" only="">

Device = "host1"
Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.0/host1"
  fw_dump             =
  nvram               = "ISP "
  optrom_ctl          = <store method only>
  optrom              =
  reset               = <store method only>
  sfp                 = ""
  uevent              = "DEVTYPE=scsi_host"
  vpd                 = "‚."

Class Device = "host2" Class Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.1/host2/fc_host/host2" dev_loss_tmo = "45" fabric_name = "0xffffffffffffffff" issue_lip = <store method="" only=""> max_npiv_vports = "254" node_name = "0x20000024ff411283" npiv_vports_inuse = "0" port_id = "0x0000e8" port_name = "0x21000024ff411283" port_state = "Online" port_type = "LPort (private loop)" speed = "8 Gbit" supported_classes = "Class 3" supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit" symbolic_name = "QLE2562 FW:v7.01.00 DVR:v8.06.00.08-k" system_hostname = "" tgtid_bind_type = "wwpn (World Wide Port Name)" uevent = vport_create = <store method="" only=""> vport_delete = <store method="" only="">

Device = "host2"
Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.1/host2"
  fw_dump             =
  nvram               = "ISP "
  optrom_ctl          = <store method only>
  optrom              =
  reset               = <store method only>
  sfp                 = ""
  uevent              = "DEVTYPE=scsi_host"
  vpd                 = "‚."

2) Do you have any reference that deploy cinder-volume on VM with FC Driver?

Thank you in adnance.

Thank you for Answer my question.

I tried and success to create volume with image. But I success with cinder-volume service on Management Host not VM.

I think that deploy cinder-volume on Management Host is not efficient because Hostmachine has too much specs. So, I want to deploy cinder-volume service on VM.

Could you please let me know on following questions -

1) I tried your suggestion about deploying on VM with http://wiki.libvirt.org/page/NPIV_in_libvirt (NPIV in libvirt).

but, there are some problem. first, there is nothing after execute the command "virsh nodedev-list --cap vports". Is there anything missing? missing?

my test environment is below : :

OS : ubuntu 14.04 Storage : EMC VNX5400 # VNX5400

systool -c fc_host -v

-v

Class = "fc_host"

Class Device = "host1" Class Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.0/host1/fc_host/host1" dev_loss_tmo = "45" fabric_name = "0xffffffffffffffff" issue_lip = <store method="" only=""> max_npiv_vports = "254" node_name = "0x20000024ff411282" npiv_vports_inuse = "0" port_id = "0x0000e8" port_name = "0x21000024ff411282" port_state = "Online" port_type = "LPort (private loop)" speed = "8 Gbit" supported_classes = "Class 3" supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit" symbolic_name = "QLE2562 FW:v7.01.00 DVR:v8.06.00.08-k" system_hostname = "" tgtid_bind_type = "wwpn (World Wide Port Name)" uevent = vport_create = <store method="" only=""> vport_delete = <store method="" only="">

Device = "host1"
Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.0/host1"
  fw_dump             =
  nvram               = "ISP "
  optrom_ctl          = <store method only>
  optrom              =
  reset               = <store method only>
  sfp                 = ""
  uevent              = "DEVTYPE=scsi_host"
  vpd                 = "‚."

Class Device = "host2" Class Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.1/host2/fc_host/host2" dev_loss_tmo = "45" fabric_name = "0xffffffffffffffff" issue_lip = <store method="" only=""> max_npiv_vports = "254" node_name = "0x20000024ff411283" npiv_vports_inuse = "0" port_id = "0x0000e8" port_name = "0x21000024ff411283" port_state = "Online" port_type = "LPort (private loop)" speed = "8 Gbit" supported_classes = "Class 3" supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit" symbolic_name = "QLE2562 FW:v7.01.00 DVR:v8.06.00.08-k" system_hostname = "" tgtid_bind_type = "wwpn (World Wide Port Name)" uevent = vport_create = <store method="" only=""> vport_delete = <store method="" only="">

Device = "host2"
Device path = "/sys/devices/pci0000:40/0000:40:01.0/0000:41:00.1/host2"
  fw_dump             =
  nvram               = "ISP "
  optrom_ctl          = <store method only>
  optrom              =
  reset               = <store method only>
  sfp                 = ""
  uevent              = "DEVTYPE=scsi_host"
  vpd                 = "‚."

2) Do you have any reference that deploy cinder-volume on VM with FC Driver?

Thank you in adnance.